Mr. KAUSHIKKUMAR PATEL

Faculty Details


  • Designation : Assistant Professor
  • Qualification : Ph. D. (Mechanical)
  • Experience : 13 Years
  • Area Of Interest : Machine Design

Education Qualification

B. E. Mechanical  


(From L.D.C.E. Ahmadabad, Gujarat University in 2002)

M.E. Mechanical ( Machine  Design )

(From B. V. M. , Sardar Patel University, Vallabh Vidhyanagar in 2007)

Ph.D.  (Mechanical)

(From Gujarat Technological University, Ahmedabad in 2021)

Work Experience

Lecture in Mechanical Department 


B.S.Patel Polytechnic , Ganpat Vidhyanagar , Kherva 
( 21- Dec -2005 to 29 - April 2011 )


Asst. Professor in Mechanical Department

Government Engineering College,  Palanpur 
(30-April 2011 to  05 Dec-2018 ) 

Government Engineering College,  Patan 
( 06 Dec-2018 to onward )

Patent Publication

RSSR SS Motion Platform with stability control using Universal joint


202021052066A Dated: 01/01/2021

Subject Taught

Machine Design 
Design of Machine Element
Dynamics of Machinery 
Theory of Machine 
Kinematic  of Machine 
Machine Design and Industrial Drafting 
Elements of Mechanical Engineering 
Engineering Graphics 

Training Taken

ADVANCE OPTIMIZATION THROUGH INTELLIGENT TECHNIQUES, AICTE Sponsored at SVNIT Surat on 16-20 June 2008

ADVANCE IN HEAT TRANSFER IN MECHANICAL ENGINEERING, ISTE approved at Parul Institute of Engineering and Technology , Vadodara on 17- 21 November 2008

ADVANCE IN MANUFACTURING, AICTE Sponsored at SVNIT Surat on 29th December 2008 to 2nd January 2009

ENGINEERING DRAWING USING CAD, AICTE Sponsored at SVNIT, Surat on 23-27 November 2009

COMPUTER AIDED DESIGN AND MANUFACTURING by American Society of Mechanical Engineers (ASME) Anchor partnership with SVNIT, Surat on 20-21 December 2011.

ADVANCE FINITE ELEMENT ANALYSIS by American Society of Mechanical Engineers (ASME) Anchor partnership with SVNIT, Surat on 22-24 December 2011

INDUCTION TRAINING PHASE –I at NITTTR, Ext. Center, Ahmedabad on 15- 26 April 2013

INDUCTION TRAINING PHASE –II at NITTTR, Ext. Center, GUJARAT on 2-13 December 2013

KARMYOGI RESIDENTIAL TRAINING, Organized By CTE Gandhinagar on 17-19 January 2014

VAHIVATI TALIM at SPIPA, Gandhinagar on 09-13 June 2014

ACADEMIC AND RESEARCH PAPER WRITING , at NITTTR, Ext. Center, Ahmedabad on 23-27 February 2015

DEVELOPMENT OF LAB MANUAL AND PROJECT WORK FOR MECHANICAL ENGINEERING AND ALLIED PROGRAMS, at NITTTR, Ext. Center, Ahmedabad on 15-19 June 2015

3D ANIMATION at NITTTR, BHOPAL 27 June to 8 July, 2017

PORTFOLIO ASSESSMENTS, at NITTTR, Ext. Center, Ahmedabad 2-6 January 2017

RESOURCE MANAGEMENT FOR MANUFACTURING SECTOR at NITTTR, Bhopal 3-14 July, 2017

Portfolio

Coordinator - C.O.E.

  • To cultivate symbiotic relationship between college and industry.
  • To provide ample opportunities for industry exposure to students and faculty through industry visits, summer internship and industry projects.
  • Industry exposure to students and faculty.
  • Students’ projects/dissertation work in industries under joint guidance of the faculty and experts from industry.
Coordinator - Faculty Training  Monitoring Cell 
  1. To assess the implementation of guidelines, circular letters, regulations and other directions made by the CTE, Gandhinagar, GTU and Institute for Training
Departmental Duties

  1. Faculty Training Monitoring Cell at Departmental Level

Research Papars

PRIMARY RESEARCH AREA:

Balancing Parameter of Spatial , Multi loop and single loop mechanism ( Variable Input Speed)



“Analysis of Spatial Mechanism in dynamic equilibrium condition using MatLab” By K.V. Patel & Dr. Anurag Verma at International Journal of Engineering Science and Technology (IJEST) ISSN: 0975-5462

“Analysis of Planner Kinematics Chain By Moment Matrix Method” By K.V. Patel & S .J. Patel at International Journal of Design Engineering, Inderscience Publication, Switzerland.

“Analysis of Planner Kinematics Chain By Moment Matrix Method” By K.V. Patel & S .J. Patel at International Conference on “Advance In Mechanical Engineering” on 15-17 Dec,2008 at SVNIT, Surat, Gujarat.

“Optimization Of Four Bar Linkages In Variable Input Speed With Kinematic And Dynamic Synthesis Using MatLab” By K.V. Patel & S .J. Patel at International Conference on “Advance In Mechanical Engineering” on 15-17 Dec,2008 at SVNIT, Surat, Gujarat.

" Evolution of Efficiency of Flat panel used in coal mining industry- A Case study " B. P. Patel & K. V. Patel on 3-5 August -2009 At SVNIT, Surat, Gujarat.

“Moment matrix method for selection of planar kinematics chains.” By S. J. Patel & K.V. Patel at National Conference on Mechanical Engineering Department -Emerging trends in Mechanical Engineering, Vallabh Vidhyanagar, Gujarat on 28-29 March 2008. '

“Kinematics synthesis & optimizations of four bar linkages Using Mat lab in variable input speed.” By K.V. Patel & S. J. Patel at National Conference on Mechanical Engineering Department -Emerging trends in mechanical engineering, Vallabh Vidhyanagar, Gujarat on 28-29 March 2008.

“A Novel Approach For Selection of Production Plant layout in Manufacturing Environment using MADM method: Strategy case Study” By K. V. Patel, S J. Patel & B. D. Prajapati at National Conference on “Advancement and Futuristic Trend In Mechanical Engineering” on 20th Nov-2008 at Rajkot.

“A Novel Approach For Selection of Material In Manufacturing Environment using MADM method: Strategy case Study “ By K. V. Patel at 3rd National Conference on Recent Development In Mechanical Engineering” on 14-15 Nov-2008 at Thapar University, Patiala.

Book Publication

“WORKSHOP TECHNOLOGY “ AUTHOR K. V. PATEL PRACTICE MANUAL FOR FIRST YEAR DEGREE AND DIPLOMA STUDENT AS PER GTU SYLLABUS IN ATUL PRAKASAN


“ELEMENTS OF MECHANICAL ENGINEERING “ AUTHOR K. V. PATEL FOR FIRST YEAR DEGREE STUDENT AS PER GTU SYLLABUS IN ATUL PRAKASAN , ISBN 8189736027


“MANUFACTURING PROCESS-I " AUTHOR K. V. PATEL FOR SECOND YEAR DEGREE STUDENT AS PER GTU SYLLABUS IN ATUL PRAKASAN


"PRODUCT DESIGN AND VALUE ENGINEERING " AUTHOR K. V. PATEL FOR THE FINAL YEAR DEGREE STUDENT AS PER GTU SYLLABUS IN ATUL PRAKASAN.


"OPERATION RESEARCH " AUTHOR K. V. PATEL FOR THE FINAL YEAR DEGREE STUDENT AS PER GTU SYLLABUS IN ATUL PRAKASAN. ISBN No.   978-93-85173-07-3


"MANUFACTURING PROCESSES" SUB CODE:3141908, AUTHOR PROF. K. V. PATEL FOR THE 4TH SEMESTER B.E. MECHANICAL STUDENT AS PER NEW REVISED GTU SYLLABUS. ISBN 978-93-85138-48-5